CO2 INCUBATOR 246 L, WITH AUTOMATIC STERILIZATION CYCLE
Guaranteed safe payment
CO2 INCUBATOR 246 L, WITH AUTOMATIC STERILIZATION CYCLE
This CO2 incubator has an approximate capacity of 246 liters and features an automatic sterilization cycle. It is a high-performance laboratory device designed to support the cultivation of cells, bacteria, or sensitive tissues. It combines precise environmental control with integrated decontamination functions, helping to maintain a clean and stable incubation environment.
Large internal capacity of approximately 246 liters provides ample space to accommodate multiple culture vessels.
Precise CO2 level control via NDIR (Non-Dispersive Infrared) sensor with electronic regulation and self-diagnostic features to ensure gas concentration stability.
Automatic hot air sterilization cycle (via STERICard system) heats the chamber to a high temperature, holds it for a specified period, then cools it—all without manual intervention.
Stainless steel interior with multiple sliding shelves supports hygienic operation and easy cleaning.
Reliable temperature control with high precision and minimal spatial and temporal variation.
Stainless steel inner chamber.
NDIR type CO₂ sensor with electronic control and self-diagnostics.
STERICard system for activating the automatic sterilization cycle.
Sliding stainless steel shelves (two or three depending on the model).
Operation is via the front control panel and inserting the STERICard to initiate the automatic sterilization sequence.
The sterilization process includes a heating phase to approximately 160°C, a heat holding phase for several hours, followed by a cooling phase and a short waiting period before the chamber returns to a safe temperature.
CO₂ regulation and temperature control operate continuously, with alarms and diagnostics to alert users to any deviations.
Ensure the chamber is empty before starting sterilization; shelves and water trays can be left inside.
The final sterilization status is displayed on the control unit and recorded on the STERICard for tracking purposes.
Includes the incubator unit, STERICard for sterilization, and two or three sliding stainless steel shelves (depending on the model).
This incubator is not intended to sterilize contents placed inside the chamber; the sterilization cycle is designed only to sterilize the device's internal surfaces.
This CO2 incubator has an approximate capacity of 246 liters and features an automatic sterilization cycle. It is a high-performance laboratory device designed to support the cultivation of cells, bacteria, or sensitive tissues. It combines precise environmental control with integrated decontamination functions, helping to maintain a clean and stable incubation environment.
Main Benefits
Large internal capacity of approximately 246 liters provides ample space to accommodate multiple culture vessels.
Precise CO2 level control via NDIR (Non-Dispersive Infrared) sensor with electronic regulation and self-diagnostic features to ensure gas concentration stability.
Automatic hot air sterilization cycle (via STERICard system) heats the chamber to a high temperature, holds it for a specified period, then cools it—all without manual intervention.
Stainless steel interior with multiple sliding shelves supports hygienic operation and easy cleaning.
Reliable temperature control with high precision and minimal spatial and temporal variation.
Installation
Stainless steel inner chamber.
NDIR type CO₂ sensor with electronic control and self-diagnostics.
STERICard system for activating the automatic sterilization cycle.
Sliding stainless steel shelves (two or three depending on the model).
Usage Instructions
Operation is via the front control panel and inserting the STERICard to initiate the automatic sterilization sequence.
The sterilization process includes a heating phase to approximately 160°C, a heat holding phase for several hours, followed by a cooling phase and a short waiting period before the chamber returns to a safe temperature.
CO₂ regulation and temperature control operate continuously, with alarms and diagnostics to alert users to any deviations.
Ensure the chamber is empty before starting sterilization; shelves and water trays can be left inside.
The final sterilization status is displayed on the control unit and recorded on the STERICard for tracking purposes.
Package Size
Includes the incubator unit, STERICard for sterilization, and two or three sliding stainless steel shelves (depending on the model).
Note
This incubator is not intended to sterilize contents placed inside the chamber; the sterilization cycle is designed only to sterilize the device's internal surfaces.